The advantages and disadvantages of brush cutter

The appearance of the brush cutter is similar to that of a wire cutter, but the brush cutter uses thin nylon rope to cut vegetation such as long grass or weeds, while the lawn mower uses a metal blade to cut through dense vegetation and no more than 4 inches. Thick tree trunk. Brush cutters have more power and versatility than trimmers, but they also have some shortcomings to consider.

One of the biggest disadvantages of brush cutters is learning the cutting techniques necessary to avoid injury or damage to the machine. The lawnmower has a specific mowing area, which means you can not only invade plants from any direction. The blade rotates counterclockwise, so it must move from right to left when cutting. The cutting area is 90 degrees from the top of the blade to the left; if you hit a thick stem or branch with any other part of the blade, the machine may kick back. Slowly push the blade into the brush or plant, so that you press your head against the material instead of shaking it. If you use a shredder to cut with a lawnmower, the machine may emit smoke and stop working, because branches and other materials may stick around the blade, causing the blade to overheat.

Brush cutters have different blade attachments that allow you to cut a variety of materials. Provided they are properly maintained, they are usually durable and reliable machines. However, the life of the blade depends on what you want to cut and how often. For example, if you often work in rocky areas or cut through hard stems or branches, you may have to change or sharpen the blades every day. Before each use, the sharpness of the blade should be checked, because the use of a blunt blade will shorten the service life and may cause safety hazards.

The lawnmower is powerful and can remove weedy brushes that the lawnmower or trimmer cannot handle. They also cut into hard-to-reach areas that large machines could not enter. However, most brush cutters are cumbersome to operate, and if larger areas must be cleaned, it may cause fatigue. Most brush cutters have straight shafts and anti-vibration functions to reduce operator fatigue. The use of wiring harnesses also helps to control the machine and reduce the load during work.