Introduction of Chainsaw

Chainsaw, short for "petrol chain saw" or "petrol power saw". Chainsaw for logging and construction materials. Its sawing mechanism is a saw chain. The power part is a gasoline engine. Easy to carry and easy to operate. However, maintenance and repair are more complicated. The chain saw accessories we usually say include: crankshaft, chain saw, piston, air cleaner, air cylinder, crankcase, muffler, high pressure bag, electromagnetic flywheel, etc. New chainsaw chain including left incisor, right recess, drive, connection and rivets.

There are two connecting holes in the lower part of the left cutting tooth block and the right cutting tooth block. The complete unit of the saw chain is: the left cutting blade and the connecting piece are sandwiched by two rivets to sandwich the left and right driving pieces. The right cutting piece and the other connecting piece are provided with two rivets, and the other is left and right. The two drive boards are sandwiched in between. The remaining two plates are connected by two rivets at the connection holes of the drive plates in the upper two components, and the two drive plates are sandwiched one-to-one between the left and right.

Several saw chain units form a closed integrated saw chain. The angle between the incisor and the side of the incisor is 87°-90°; the intersection of the incisor and the side of the incisor is gradually forming a small angle arc from the middle to the end. The cutting plane of the incisor. The angle formed by the edge line and the side cut surface line is 50°-52°. The advantages of this saw chain are high efficiency, low wear, low noise, and easy material selection.