Abstract: Through these professional chain replacement steps, the next chain saw chain can be replaced quickly and accurately. Because this is a normal part of chain saw use and ownership, knowing how to properly change the chain saw chain can save tool users time and money.
Even though the steps to replace the chain are simple and take less than five minutes, some maintenance details must be pointed out that can make a difference between a correctly installed chain and an incorrectly installed chain.
1. Remove the side panel of the guide plate.
Use a wrench to unscrew the nut, and then remove the plate to contact the chain.
If the brake of the chainsaw is installed on its side plate, make sure to unlock the brake before releasing the sprocket. Removing the side panel with the brake in the locked position may make reinstallation difficult or impossible.
2. Release the chain tension.
The sprocket plate is now free of the saw, so the old chain can be removed. Pull the nose of the saw blade away from the saw to loosen it from the tensioner.
3. Remove the old chainsaw chain.
All slack on the chain can be easily removed from the chain.
Remove the old chainsaw chain. https://uanbuy.com
Pull the drive link out of the guide rod and slide the other end of the chain around the clutch drum.
If you are a wholesaler or distributor of garden machinery, outdoor power Equipments, agricultural machinery, outboard motors, welcome to contact us for quotation.
Building 1 NO. 18 East Mindong Street, Yongkang, Zhejiang, China
Building 6, Greenland Building, No. 2369, East Rongle Road, Shanghai, China.
Phone : +86 133 7025 3614
Email : [email protected]