1. you should use it first when using a new file. Only when it is blunt can you use the other side. Do not use the chain saw circular knife on both sides during drilling.
2. in the boring saw chain, the full length of the file should be fully utilized, which can improve the boring efficiency and avoid local wear of the dent.
3. in the course of use, it is necessary to use a wire brush to clean the chips embedded in the tooth gap in time, and to clean along the dent line to prevent cleaning. Do not blow crumbs with your mouth, do not rub the surface with your hands or rinse with water.
4. During use, do not use the file as a crowbar or hammer, and do not stain with water or water.
5. Selection criteria for chain saw files:
Small pitch 3/8 chain; 0.050 electric chain saw with 4.0 mm file
0.325 pitch chain; 0.058 chain saw chain with 4.8mm file
Large pitch 3/8 chain; 0.050, 0.063 chain and 5.5mm file
Finally, after use, you must clean up the files to avoid rust. When placed in the tool box, do not stack it with other tools or workpieces, or stack with other files, to avoid damage to dental caries.
If you are a wholesaler or distributor of garden machinery, outdoor power Equipments, agricultural machinery, outboard motors, welcome to contact us for quotation.
Building 1 NO. 18 East Mindong Street, Yongkang, Zhejiang, China
Building 6, Greenland Building, No. 2369, East Rongle Road, Shanghai, China.
Phone : +86 133 7025 3614
Email : [email protected]