How to Sharpen a Gasoline Chainsaw: 3 Essential Maintenance Tips

Learning how to sharpen gasoline chainsaw is essential to start the season right and save money. Why pay $15 for new chain when you can sharpen your gas chainsaw? Increased efficiency and reduced fatigue.

That's all you need to know about chainsaw sharpening, and it all comes down to three basic steps.

1. Align your tools

The chainsaw chain is divided into three parts. The cutters represent the left and right teeth of the chain. A depth guide is then used to control the depth of the cutter through the wood.

Want to learn how to sharpen a gasoline chainsaw without maintenance? First, you'll need two sets of files: a round file and a 6-inch flat file, which vary in size depending on the pitch of your chain. You should also have a file guide to hold the file in place when you use the file on the knife, and a second file guide that comes with the depth guide. Finally, put on heavy gloves to protect your hands from the blade and metal burrs.

2. Start with a cutter

First cut a slot in a piece of wood or stump to stabilize the uanbuy chainsaw. Insert the round file into the guide, place the guide over the chain, pull the file away from you at an angle of about 30-35 degrees and move it in one direction only. Go from one set of tools to another, skipping one by one. The guides ensure that the file stays at the correct depth. After all the manipulations are done on one side, you can go to the other side of the chain and make a second cut using the same technique.

3. Handling advice

Learning how to sharpen a uanbuy gasoline chainsaw also means keeping the guides at the correct depth. Over time, the tool can wear down to the point where it sits below the guide, which means the saw stops biting properly. Place the depth gauge file guide on the tooth and make sure that the guide protrudes from the guide frame. If so, it means that you are especially careful about tools. A flat file must be used to restore the depth gauge. Repeat this process for each guide on the saw.

Using the above method, you can sharpen the blade of a uanbuy gasoline chainsaw by about 10 times. After that, it may be better to replace the entire chain. If you have problems with your chain or have abused it, such as hitting it, consult a professional to see if it needs to be replaced before you can use it again. Yet, to use it for a long time, please perform proper lubrication and polishing according to the usage specifications in the instruction manual.