Brush cutter safety rules and operation guide

Abstract: Brush cutter is an important tool for garden weeder, lawn mower and lawn mower. After purchasing the machine, you also need to follow safety precautions.

Brush cutters are heavy machines with complex systems. The correct safety method should be followed, or at least you understand the consequences of poor operation of the machine so that you can handle it carefully.

Most importantly, unless you are sure that they are responsible and read this manual correctly, do not let anyone move the machine.

Eye protection is important, so wear goggles when working. Do not wear loose clothing or loose hair to avoid getting caught in the mobile device. It is also recommended to cover your legs to prevent flying debris.

Before use, please check the whole machine for loose parts or damage. Repair or replace if necessary.

Always use accessories recommended by the manufacturer. The wrong connection of the power head may cause serious injury to the operator or bystanders.

Always use shoulder straps and handle straps when cutting. Also remove any oil or fuel from the handle to eliminate slippage.

Do not mix fuel in closed spaces or near flames. Always store fuel in properly labeled containers and remove the fuel tank cap when the engine is running.

Do not make any engine adjustments while the machine is running.

Never start the machine in a closed room. The initial smoke was heavy and filled with carbon monoxide.

Don't surpass, always maintain balance. It is very dangerous to run the machine while standing on a ladder or any unstable platform.

Before refueling, be sure to cool the engine. If your gasoline spills out of the "Business Management Terms", please clean it up and deal with it before restarting the engine.